Resetter Canon Ip1980 May 2026

Objective: To clear the "Waste Ink Absorber Full" error (typically indicated by blinking orange light 7 times or an error code 5B00) and return the printer to a functional state.

The Canon iP1980 uses an internal counter to track the amount of ink flushed into its waste ink pads. Once this counter reaches a predetermined limit, the printer permanently locks itself to prevent overflow. Note: This reset does not physically clean or replace the pads; it only resets the counter. resetter canon ip1980

Resetting the Canon iP1980 using Service Tool v1800 is effective for clearing the 5B00 error, but it is a temporary solution . For a "good report" in a maintenance context, always combine the software reset with physical waste ink pad maintenance to ensure long-term reliability. Objective: To clear the "Waste Ink Absorber Full"

| Symptom | Solution | | :--- | :--- | | Tool shows "Error 002" | Printer not in Service Mode. Repeat step 1 carefully. | | Tool shows "Error 005" | USB port not selected manually. Choose USB001/002, not Auto. | | Reset seems successful but error returns immediately | Waste pads are physically full. Clean pads or install external tank, then reset again. | | Lights flash green then orange 7 times after reset | EEPROM failure. Printer is beyond economical repair. | Note: This reset does not physically clean or