Recycling Ielts Listening - Paper Production And

Let’s begin with . The raw material is, of course, wood. Softwood species like pine and spruce are preferred because of their long cellulose fibres, which produce strong paper. The process starts with debarking and chipping the logs. These chips are then subjected to either a mechanical or chemical pulping process.

Stage four is , arguably the most complex step. Air bubbles are forced through the pulp while a chemical – a surfactant – attaches to the ink particles. The bubbles rise to the surface, forming a frothy layer of ink that is skimmed off. This process can remove up to 90% of printing ink. paper production and recycling ielts listening

In , the wood is ground against a rotating stone. This method yields a high volume of pulp – up to 95% of the wood becomes paper – but the resulting product is relatively low quality, yellowing quickly due to residual lignin. This type is typically used for newsprint and telephone directories. Let’s begin with

The fifth stage is , where the recovered fibres are beaten to swell and roughen them, improving their ability to bond. Finally, stage six: paper making , where the cleaned pulp is diluted, spread onto a wire mesh screen to drain water, pressed between rollers, and then heated to dry. The process starts with debarking and chipping the logs