Ivoclar Programat P200 Manual Guide
Deep Dive: The Ivoclar Programat P200 – A Manual Worth Reading (Even for Pros)
| Part | Interval (manual recommendation) | |------|----------------------------------| | Sintering tray | Every 50 cycles – inspect for cracks | | Thermocouple | Replace every 2 years or 500 cycles | | Heating elements | ~1000 cycles or when ramp time increases 20% | | Glass door seal | Monthly – clean with isopropyl alcohol | | Vacuum pump oil | Every 6 months (if external pump) | Ivoclar Programat P200 Manual
| Code | Meaning | Fix (from manual troubleshooting) | |------|---------|-----------------------------------| | E-001 | Temp ramp too slow | Check elements & power supply | | E-017 | Vacuum not reached | Check door seal & pump oil | | E-105 | Cooling fan failure | Clean fan filter (rear panel) | | E-208 | Thermocouple open circuit | Replace thermocouple | Deep Dive: The Ivoclar Programat P200 – A
If you work with high-translucency zirconia or lithium disilicate, you’ve likely seen the Ivoclar Programat P200 . It’s a compact, high-temperature furnace designed for speed and precision. But here’s the catch: assuming it works like a standard porcelain furnace can ruin a case. Always add a 5-minute drying hold at 300°C
Always add a 5-minute drying hold at 300°C for thick zirconia (>2.5mm) to avoid microcracking. 5. The Maintenance Schedule (What Actually Wears Out)
Lets see Slider Revolution in Action
All example sliders you find below are included with the download of the Slider Revolution 5.0 Plugin.
Oh, and it also comes with all assets like images and videos. Browse the Examples Folder through to find your favorite Example. Duplicate it and just start to build your own Slider based on our examples!
Customization is a Breeze!
Deep Dive: The Ivoclar Programat P200 – A Manual Worth Reading (Even for Pros)
| Part | Interval (manual recommendation) | |------|----------------------------------| | Sintering tray | Every 50 cycles – inspect for cracks | | Thermocouple | Replace every 2 years or 500 cycles | | Heating elements | ~1000 cycles or when ramp time increases 20% | | Glass door seal | Monthly – clean with isopropyl alcohol | | Vacuum pump oil | Every 6 months (if external pump) |
| Code | Meaning | Fix (from manual troubleshooting) | |------|---------|-----------------------------------| | E-001 | Temp ramp too slow | Check elements & power supply | | E-017 | Vacuum not reached | Check door seal & pump oil | | E-105 | Cooling fan failure | Clean fan filter (rear panel) | | E-208 | Thermocouple open circuit | Replace thermocouple |
If you work with high-translucency zirconia or lithium disilicate, you’ve likely seen the Ivoclar Programat P200 . It’s a compact, high-temperature furnace designed for speed and precision. But here’s the catch: assuming it works like a standard porcelain furnace can ruin a case.
Always add a 5-minute drying hold at 300°C for thick zirconia (>2.5mm) to avoid microcracking. 5. The Maintenance Schedule (What Actually Wears Out)
