Huawei Hg8245h Firmware Upgrade -

load pack by tftp svrip 192.168.100.2 remotefile HG8245H.bin Wait for Software Operation Successful message. Then reboot. ISP can push firmware automatically. No user action required except ensuring device stays powered on during maintenance window. 5. Post-Upgrade Verification | Check | Expected Result | |-------|----------------| | PON LED | Solid green (registered with OLT) | | LOS LED | Off | | Internet connectivity | Working via both LAN and Wi-Fi | | Voice (VoIP) | Registration OK (if configured) | | Configuration persistence | Custom settings retained (unless factory reset after upgrade) |

Report compiled for informational use. Always confirm hardware compatibility before flashing. Huawei Hg8245h Firmware Upgrade

| Parameter | Value | |-----------|-------| | Default IP | 192.168.100.1 | | Super admin | telecomadmin / admintelecom | | User admin | root / admin | | Telnet port (if enabled) | 23 | | TTL serial console | 115200 baud, 3.3V logic | load pack by tftp svrip 192